Brands
Produktkategorier
Gå til
webshop
36.122,00 DKK 45.995,00 DKKPrisinterval: 36.122,00 DKK til 45.995,00 DKK ekskl. moms.
9.635,00 DKK ekskl. moms.
Vælg variant
Levering
Levering bliver beregnet ved kassen
MT 1271 93S15 0V TTLx5 200.00 MT 01 .. 1.50 01 1.7 mm 90 50 0.400 01
Incremental length gauge HEIDENHAIN-METRO
Plunger actuation: Extended by spring force
Measuring length: 12 mm
Type of guide: ball guide
Reference mark position: 1.7mm
Accuracy grade: 0.2 µm
Electrical connection: D-sub connector, 2-row, withintegrated electronics, coated, male 15-pin
Pin configuration: D330978
Cable type: PUR Ø 4.5 mm
Cable length: 1.50 m
Output signal: Square-wave signals, TTL levels with 5-fold interpolation
Max. scanning frequency: 200.00 kHz
Reference pulse width: 90°
Fault detection signal: for disturbance Ua1/Ua2 high-impedance
Signal period: 0.400 µm
Power supply: 5V+-10%
Degree of protection: IP 50 (EN 60529)
Operating temperature: +10/+40 °C
Betalingsmuligheder
Producent
MT 1271 93S15 0V TTLx5 200.00 MT 01 .. 1.50 01 1.7 mm 90 50 0.400 01
Incremental length gauge HEIDENHAIN-METRO
Plunger actuation: Extended by spring force
Measuring length: 12 mm
Type of guide: ball guide
Reference mark position: 1.7mm
Accuracy grade: 0.2 µm
Electrical connection: D-sub connector, 2-row, withintegrated electronics, coated, male 15-pin
Pin configuration: D330978
Cable type: PUR Ø 4.5 mm
Cable length: 1.50 m
Output signal: Square-wave signals, TTL levels with 5-fold interpolation
Max. scanning frequency: 200.00 kHz
Reference pulse width: 90°
Fault detection signal: for disturbance Ua1/Ua2 high-impedance
Signal period: 0.400 µm
Power supply: 5V+-10%
Degree of protection: IP 50 (EN 60529)
Operating temperature: +10/+40 °C
| Vægt | 517 g |
|---|---|
| Interface | TTL |
| Diameter | 4,5mm |
| Stiktype | |
| Målelængde | |
| Kabellængde |
Dokumentation
Spare parts kit filter PNE 051/ 054/FS62
Kompatibel med:
2.499,00 DKK ekskl. moms.
M4 silver steel crash protection device, L 16 mm - Brækstift
150,00 DKK ekskl. moms.
TS 750 .. 7DL02 QE 0.00 .. T434 .. .. 0069 Workpiece touch probe Repeatability: 0.25 µm Output signal: Electrical connection: PCBA contact strip, female, 2-pin Cable type: w/o cable Stylus geometry: T434 L=40 mm, ball Ø 4 mm, shaft Ø 3 mm, without rated break point Axial deflection force: 8.0 N Housing material: Steel, stainless (1.4104)
Kompatibel med:
26.600,00 DKK ekskl. moms.
RMP600 Q probe (radio/radio) The RMP600 Q is a compact, high-accuracy touch probe with radio signal transmission. Excelling in the measurement of complex 3D shapes and contours, the RMP600 Q with RENGAGE technology is ideally suited to 5-axis machining applications.
49.995,00 DKK ekskl. moms.
Vær på forkant med udviklingen!
Få den nyeste viden om NORDIC med vores nyhedsbrev
*Jeg giver samtykke til, at NORDIC A/S må kontakte mig med nyheder, informationer og tilbud. Jeg må kontaktes pr. e-mail, telefon og brev. Jeg accepterer samtidig, at NORDIC A/S behandler mine personoplysninger til ovenstående formål. NORDIC A/S er dataansvarlig. Du kan til hver en tid trække dit samtykke tilbage.
